SKT C / Rigging Spezialkurs

SKT C / Rigging Spezialkurs

Professional Course: Rigging Specialty
This course covers:

  • Speedline construction
  • Dismantling at exposed locations
  • Working with various winch and bollard systems in rigging
  • Crane-assisted felling

Expand your knowledge in this 5-day professional course! Our trainer is a hands-on practitioner with extensive experience. Benefit from this and take home many valuable tips that you can incorporate into your daily work.

Prerequisites for course participation:

  • SKT B certificate
  • 16-hour first aid certificate (no more than 4 years old – refresher courses are ok!)
  • Valid occupational health examination for "work at heights with risk of falling" (e.g. according to G41)
  • Ideally at least 1 year of SKT B practical experience
  • Important! Attendance of the Rigging on a Model course

Equipment to bring:
The personal protective equipment (PPE) brought must be inspected and documented by a competent person before use in the course. New PPE is exempt from inspection, provided it is unused and meets applicable standards.

An annual PPE inspection including inspection protocol is legally required (according to ASchG).

  • The inspection protocol must be presented to the trainers on the first day of the course (Monday).
  • Ascent devices must be approved for the Austrian market, if applicable including the approved rope.
  • The associated rescue and emergency procedures (rescue scenarios) for the ascent device used must be known to you.
  • PPE inspections can be carried out by staff at the Kreitl Shop in Raasdorf (Freeworker Austria) before the course. To schedule an appointment: +43 664 517 72 44

Information on the certificate and recertification: After passing the exam, you will receive an SKT certificate and a card. These are valid for 3 years. For recertification, a 4-hour rescue training session must be attended, and proof of a current 16-hour first aid course (refresher courses are ok) and valid occupational health examination must be provided.


Course Content

  • Speedline construction
  • Dismantling at exposed locations
  • Working with various winch and bollard systems in rigging
  • Crane-assisted felling

 

Expand your knowledge in this 5-day professional course! Our trainer is a hands-on practitioner with extensive experience. Benefit from this and take home many valuable tips that you can incorporate into your daily work.


Requirements

  • SKT B certificate
  • 16-hour first aid certificate (no more than 4 years old – refresher courses are ok!)
  • Valid occupational health examination for "work at heights with risk of falling" (e.g. according to G41)
  • Ideally at least 1 year of SKT B practical experience
  • Important! Attendance of the Rigging on a Model course

What to Bring

  • Valid occupational health examination "work at great heights with risk of falling" (if no expiry date is indicated, no more than 3 years old)
  • 16-hour first aid certificate (no more than 4 years old; refresher courses possible!)
  • Proof of chainsaw competence or attendance of the "Chainsaw Course"
  • SKT B: valid SKT A certificate
  • SKT B: written proof of 200 practical hours (SKT logbook or confirmation by the employer)
  • SKT C: valid SKT B certificate
  • SKT C: written proof of at least 1 year of SKT B practical experience & attendance of the Rigging on a Model workshop

 

The PPE must be brought complete and inspected (with inspection protocol). You are welcome to purchase any missing equipment items at Freeworker Austria.

 

  • Inspection protocol for the annual PPE inspection by a competent person
  • Complete SKT A tree care equipment (as listed above) – plus:
  • Ascent set (e.g. the Treeclimb SRT-3 Set from Freeworker, which is very similar to our training sets and was used in the SKT A course)
  • Cut-protection trousers
  • Cut-protection boots (S3 safety shoes are not sufficient!)
  • Possibly climbing shoes (above ankle height)
  • Arborist helmet with hearing and face protection
  • Steel lanyard with positioner + carabiner
  • Additionally at least 6 triple self-locking carabiners + auxiliary carabiners
  • Certified + approved ascent device for the Austrian market (if applicable including rope)
  • Adjustable strangulating cambium saver (e.g. RopeGuide 2010, RopeGuide Twinline, Pulleysafer, Eject)
  • Spikes
  • Storage box/bag for all equipment
  • Chainsaw + felling tools (if available)
  • Rigging equipment (if available)
  • Prusik lift pulley (if available)

 

The personal protective equipment (PPE) brought must be inspected and documented by a competent person before use in the course. New PPE is exempt from inspection, provided it is unused and meets applicable standards.

 

  • An annual PPE inspection including inspection protocol is legally required (according to ASchG).
  • The inspection protocol must be presented to the trainers on the first day of the course (Monday).
  • Ascent devices must be approved for the Austrian market, if applicable including the approved rope.
  • The associated rescue and emergency procedures (rescue scenarios) for the ascent device used must be known to you.
  • PPE inspections can be carried out by staff at the Freeworker Austria Shop before the course. To schedule an appointment: +43 664 517 72 44

Information on the certificate and recertification: After passing the exam, you will receive an SKT certificate and a card. These are valid for 3 years. For recertification, a 4-hour rescue training session must be attended, and proof of a current 16-hour first aid course (refresher courses are ok) and valid occupational health examination must be provided.


Investment

Course: € 944,00 excl. VAT (€ 1.132,80 incl. VAT)

Exam: € 220,00 excl. VAT (€ 264,00 incl. VAT)


Full: € 1.164,00 excl. VAT (€ 1.396,80 incl. VAT)

Share this course on social media:

← Back to overview